============================================================================

 SOFTWARE RELEASE NOTE

============================================================================

Product  : Professional GP640/GP680/GP1280/GP644/GP688 Series FlashGrade Tool
Release  : R02.05.05
Date     : 13-Feb-2006
Language : English

============================================================================

 PURPOSE OF THE RELEASE

============================================================================

FIXES THE FOLLOWING ISSUES:

N/A  

SUPPORTED FEATURES:

- Reading Radio information

- Up-Version a radio to software version R02.05.05 and codeplug to latest 
  version from previous released versions. The tuning data is saved and 
  rewrite to radio during upgrading.

- GP640/GP680/GP1280/GP644/GP688 models supported in one tool.

SUPPORTED SOFTWARE VERSIONS:

- Only official radio software release version and bands.
  In this version:
  R01.02.00, R01.02.03, R01.02.07, R01.02.04, R01.02.05, 
  R01.02.06, R01.02.07, R01.03.00, R01.03.01, R01.03.03,
  R01.03.04, R01.03.06, R01.03.07, R01.03.08, R01.03.09,
  R01.03.10, R02.00.08, R02.00.13, R02.00.15, R02.00.16, 
  R02.00.17, R02.00.20, R02.00.22, R02.01.00, R02.01.07, 
  R02.01.11, R02.01.13, R02.01.14, R02.01.16, B02.01.19,
  R02.02.00, R02.03.00, R02.04.00, R02.05.03, R02.05.05

  software is updated to version R02.05.05.
  codeplug is updated from all previous versions to the latest
  version (refer to the latest codeplug version information below).


- Supported model number:

Model Number	Tanapa		Latest	Description
		Number		Version
----------------------------------------------------------------------------------------
H25EDC9CK3	PMUD1511A	R05.00	pop 300 band
H25EDH9CK6	PMUD1512A	R05.00	pref with KEYPAD 300 band
H25EDN9CK8	PMUD1513A	R05.00	prime 300 band
H25KCH4CK6	PMUD1972A	R05.02	pref with kp VHF band
H25KCH6CK6	PMUD2048A	R05.02	pref with kp VHF band
H25KDC9CK3	PMUD1484A	R05.00	pop VHF band
H25KDC9CK3	PMUD1484B	R05.01	POPULAR VHF band
H25KDC9CK3	PMUD1484C	R05.00	POPULAR VHF band
H25KDH9CK6	PMUD1485A	R05.00	pref with kp VHF band
H25KDH9CK6	PMUD1485B	R05.01	PREFERRED with KEYPAD VHF band
H25KDH9CK6	PMUD1485C	R05.00	PREFERRED with KEYPAD VHF band
H25KDN9CK8	PMUD1486A	R05.00	PRIME VHF band
H25PDC9CK3	PMUD1538A	R05.00	pop 330 band
H25PDC9CK3	PMUD1538B	R05.00	POPULAR 330 band
H25PDH9CK6	PMUD1539A	R05.00	pref with kp 330 band
H25PDH9CK6	PMUD1539B	R05.00	PREFERRED with KEYPAD 330 band
H25PDN9CK8	PMUD1540A	R05.00	prime 330 band
H25RCH4CK6	PMUE2216B	R05.02	pref with kp UHF band
H25RCH4CK6	PMUE2216C	R05.01	pref with kp UHF band
H25RCH6CK6	PMUE2256B	R05.02	pref with kp UHF band
H25RCH6CK6	PMUE2256C	R05.01	pref with kp UHF band
H25RDC9CK3	PMUE1436A	R05.00	pop UHF band
H25RDC9CK3	PMUE1436B	R05.01	POPULAR UHF band
H25RDC9CK3	PMUE1436C	R05.00	POPULAR UHF band
H25RDH9CK6	PMUE1437A	R05.00	pref with kp UHF band
H25RDH9CK6	PMUE1437B	R05.01	PREFERRED with KEYPAD UHF band
H25RDH9CK6	PMUE1437C	R05.00	PREFERRED with KEYPAD UHF band
H25RDN9CK8	PMUE1439A	R05.00	prime UHF band
H25SDC9CK3	PMUE1481A	R05.00	pop UHF2 band
H25SDC9CK3	PMUE1481B	R05.01	POPULAR UHF2 band
H25SDC9CK3	PMUE1481C	R05.00	POPULAR UHF2 band
H25SDH9CK6	PMUE1482A	R05.00	pref with kp UHF2 band
H25SDH9CK6	PMUE1482B	R05.01	PREFERRED with KEYPAD UHF2 band
H25SDH9CK6	PMUE1482C	R05.00	PREFERRED with KEYPAD UHF2 band
H25SDN9CK8	PMUE1486A	R05.00	prime UHF2 band
H38RDC9CK3	PMUE1961A	R05.00	pop UHF band
H38RDC9CK3	PMUE1961B	R05.00	pop UHF band
H38RDC9CK3	PMUE2794A	R05.00	pop UHF band
H38RDF9CK5	PMUE2780A	R05.00	pref without kp UHF band
H38RDH9CK6	PMUE1962A	R05.00	pref with kp UHF band
H38RDH9CK6	PMUE1962B	R05.00	pref with kp UHF band
H38RDH9CK6	PMUE2795A	R05.00	pref with kp UHF band

=======================================================================================

WARNING

=======================================================================================

PLEASE READ:  WARNINGS FOR ALL RADIO TYPES 

PLEASE SAVE YOUR EXISTING CODEPLUG AS AN ARCHIVE FILE. The codeplug programming 
information may be lost after the update process therefore, it is recommended to read 
the radio using the CPS, and save an archive of the radio's codeplug before starting 
the update process. After the update, this archive can now be used to recover the 
codeplug programming information by programming the archive back into the radio.

Ensure the radio updating process is not interrupted. Interruption will cause the 
radio not to operate anymore and attempting to update the radio again will NOT be 
successful.

Do NOT create a shortcut of the program (e.g. on your desktop), the program might 
not be able to find the data files in that case!

Do not remove the programming cable or turn off the radio while the update is in 
progress.

In case of failure during the updating, a message box will appear to guide the user 
to recover from the failure, if possible.

The flashing rate can be changed only by restarting the program.

You may not run more than one copy of the program at the same time.

Baud rate 115k can only be supported by certain Radio Interface Boxes (RIB). 
Use 19k baud rate when using a RIB. RKN4075A RIBless cable supports 115k baud.


============================================================================

 HOW TO INSTALL AND RUN THIS SOFTWARE

============================================================================

Installation of the software can be completed by double clicking the setup 
file "UpgradeTool_MPT_Portable-R02.05.05.exe",and can be started through 
Programs Menu.

Do NOT create a shortcut of the program e.g. on your desktop,the program 
might not be able to find the data files in that case !


REQUIRED EQUIPMENT


For the usage of this software the following radio accessories are required:

    - Flash adapter, P/N HLN9742A or B
    and (i)
    - Radio Interface Box, P/N RLN4008
      with battery or power supply
    - RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
    - Programming/test cable, P/N RKN4074 (GP3xx, GP6xx, GP12xx)
    - Programming/test cable, P/N JMKN4123 (GP344, GP388)
    or (ii)
    -  RIBless programming cable, P/N RKN4075 (GP3xx, GP6xx, GP12xx)

    By using equipment (i) the Flash adapter has to be connected between the 
    Radio Interface Box and the Programming/test cable.Maximum baud rate for 
    this equipment is 19,200 Bd.

    By using equipment (ii) the Flash adapter has to be connected between the 
    PC and the RIBless programming cable.

    For Flash Adapter HLN9742A, "Flash mode on" means switch position "ON".

    For Flash Adapter HLN9742B, "Flash mode on" means switch position "A", 
    position "B" is not used for portable flashing.


=======================================================================================

INSTRUCTIONS ABOUT UPGRADING PROCESS

=======================================================================================

The following instructions detail the operations of the Firmware Kit:

(Note: These instructions must be followed in the exact order to work properly):
1.  Read through the README file and make sure your radio meets the updating 
    specifications. The README file can be found by going through Start Menu 
    >> PPrograms >> Professional Radios UpgradeTool  >> UpgradeTool MPT Portable - R02.05.05  
    >> README

    These instructions must be followed in the exact order for the radio 
    updating to work properly

2.  Start the Firmware Kit by going to Start menu Programs >> Professional Radios UpgradeTool  
    >> UpgradeTool MPT Portable - R02.05.05  >> UpgradeTool MPT Portable - R02.05.05

3.  Connect a fully charged battery or a power supply to a radio and turn the 
    radio on. Ensure that the radio has powered up properly.

4.  Attach the programming cable to the radio. Connect the other end of the 
    programming cable to the computer or Radio Interface Box (RIB) through 
    the flashing adapter (HLN9742B). Ensure that the flashing adapter is set 
    to "OFF" position.

5.  After the Firmware Kit is launched and only on the first attempt of updating, 
    the flash Baud rate configuration dialog box will appear. The default baud 
    rate is 19,200. Select OK if you want to use the default value or you can 
    select a different baud rate and then click the OK button.

6.  Once the update screen appears, select from the drop down menu "Radio Access > 
    Upgrade Radio > " or click the "Upgrade Radio" button. Read and follow the 
    instructions and click the 'Start Upgrade' button.

7.  You will now see a status bar indicating the checking of radio data.

8.  Set the flash adapter to 'ON' position.

9.  Remove the power from the radio and then reconnect the power.

    #Note: 
    THE RADIOS DISPLAY WILL BE BLANK AND THE RADIO WILL APPEAR TO BE NONFUNCTIONAL 
    EVEN THOUGH THE "on/off" KNOB IS IN THE "ON" POSITION. THIS IS CORRECT!!! THE 
    RADIO IS ACTUALLY IN BOOTSTRAP MODE WHICH IS REQUIRED FOR FLASHING!

10. Click the "OK" button to continue with the updating process.    

11. You will now see a status bar indicating the percentage of completion.

12. Once flashing is completed, remove the programming cable and set the flash 
    adapter to  "OFF" position.
    (This is very important, even if you are going to update another radio).

13. To update another radio, attach the programming cable, and go to step #3.

=======================================================================================

TROUBLESHOOTING

=======================================================================================

If Firmware Kit will not start

1. Make sure this is an original version of the kit and not copied off another
   computer.
2. Make sure another copy is not running on your computer.

If an error is returned when you select program, check the following:

1.  On RIB setting menu, set 'Echo' for single-wired bootstrap. 'No Echo' is for
    dual-wired bootstrap. Professional radios use single-wired bootstrap.
2.  On the Comm setting menu, make sure that the port selected is the one to
    which the radio is connected.
3.  Make sure the radio is on and properly connected to the computer.

If an error is returned immediately after the radio is in bootstrap:

 1. Click OK and switch the flash adapter to the 'CPS' or Normal or OFF
    position, turn the radio off, then on again, and try again.


============================================================================

 RADIO SOFTWARE RELEASE NOTE

============================================================================
Release warismpt-R02.05.05
Previous Release warismpt-R02.05.03

Created on Feb 13 14:00:00 GMT+8 2006