/**/
 ^r Do you really want to leave the ^r
 ^r programmer (Y/N)?               ^r
/**/
 Press any key to continue.
/**/
 ^r OK that save will overwrite existing ^r
 ^r file (Y/N)?                          ^r
/**/
 ^r More files (Y/N)? ^r
/**/
 ^r This operation will destroy  ^r
 ^r current codeplug data (Y/N)? ^r
/**/
 ^r Select 5 tone encoder options   ^r
 ^r will be lost.                   ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Select 5 tone decoder options   ^r
 ^r will be lost.                   ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Select 5 tone encoder/decoder   ^r
 ^r options will be lost.           ^r
 ^r Do you wish to continue?  (Y/N) ^r
/**/
 ^r Channel information will be lost. ^r
 ^r Do you wish to continue?  (Y/N)   ^r
/**/
 Do not enter any data here.
/**/
 Enter Clock Shift status or use 
 [F2] key to toggle.
/**/
 Enter Transmit Admit status or use 
 [F2] key to toggle.
/**/
 Enter Monitor Inhibit status or use 
 [F2] key to toggle.
/**/
 Enter PL frequency (67.0 - 250.3 Hz).
 PL Codes are found on Help screen.
/**/
 Enter RF frequency (66 - 88 MHz).
/**/
 Enter RF frequency (136 - 174 MHz).
/**/
 Enter RF frequency (403 - 470 MHz).
/**/
 Enter Decoder Enable status or use 
 [F2] key to toggle.
/**/
 Assign up to three tone sequences.
 Valid entries:  A, B, C, D
/**/
 Enter Auto Reset Timer value
 Range: 1-255 sec in 1 sec steps.
/**/
 ^r Option not programmed yet. ^r
/**/
 
/**/
 Use "Select Key" [F2] to
 enable this option.
/**/
 Use [ENTER] to display and edit
 table data.
/**/
/* Text 24:  INST_TABLES
 Use [TAB], [SHIFT TAB] to select table
 and [ENTER] to display table data.
/**/
 Enter Transmit Time-Out Timer value.
 Range: 5-1200 sec in 5 sec steps.
/**/
 Enter T.O.T. Rekey Timer value.
 Range: 0-255 sec in 1 sec steps.
/**/
 Use "Select Key" [F2] to
 disable this option.
/**/
 To change this option, select one out
 of the mutually exclusive block.
/**/
 Use "Select Key" [F2] to disable this
 option,[ENTER] to display table data.
/**/
 ^r Data in Radio will be overwritten! ^r
 ^r Do you wish to continue?  (Y/N)    ^r
/**/
^r This action will override all current ^r
^r data. Do you wish to continue? (Y/N)  ^r
/**/
 Enter text to be found :
/**/
 Insert Help Disk in Drive 
/**/
 Hit any key to continue !
/**/
^r This action will override all current ^r
^r data. Do you wish to continue? (Y/N)  ^r
/**/
 Insert ^h SYSTEM DISK ^h in Drive 
/**/
 ^r Channel frequency data will be lost. ^r
 ^r Do you wish to continue?  (Y/N)      ^r
/**/
 Enter Auto Acknowledge Delay
 Range: 0-1984 msec in 1 msec steps.
/**/
 Enter Encoder Pretime
 Range: 141-1984 msec in 1 msec steps.
/**/
Number-format: 186aaaDDDD   
a = alpha, D = digit
/**/
 Enter directory pathname and press
 [ENTER] to display the directory.
/**/
 Enter PC file name and press [ENTER]
 to load the PC file.
/**/
 Enter PC file name and press [ENTER]
 to save the PC file.
/**/
 ^r Press SHIFT for other functions.    ^r
/**/
 Enter Encoder Sequence.
 Valid entries: 0-9, A, R, K, L, M, +
/**/
 Load PC file, Read Radio or use
 Hardware Configuration for Setup.
/**/
 Enter Encoder Tone Duration.
 Range: 5-7500 msec in 1 msec steps.
/**/
 Enter Transmit Time-Out-Timer value.
 Range: 1-255 sec in 1 sec steps.
/**/
 Enter Decoder Sequence.
 Valid entries: 0-9, A, R, +
/**/
 Enter Group Call Level.
 Valid entries:  -, G
/**/
 Enter Group Tone.
 Valid entries: 0-9, A
/**/
 Enter Intersequence Delay
 Range: 141-1984 msec in 1 msec steps.
/**/
Enter Enc. Extended First Tone Duration
Range: 5-7500 msec in 1 msec steps.
/**/
Enter Dec. Extended First Tone Duration
Range: 70 msec - 7500 msec.
/**/
Enter Dec. Extended First Tone Duration
Range: 100 msec - 7500 msec.
/**/
Enter Dec. Extended First Tone Duration
Range: 40 msec - 7500 msec.
/**/
INST 57
/**/
INST 58
/**/
INST 59
/**/
