1.
Introduction
3.
Requirements
4.
Installation, upgrade, removal
6.
Legal notice
Welcome to the Motorola Commercial Series Customer Programming
Software (CPS) for the CP040, CP140, CP160, CP180, CM140, CM160, CM340 and
CM360 radios.
|
Version |
Notes |
|
R05.02 |
Fixed several
user interface bugs. |
|
R05.01 |
Support
character 'P' as Pause Character in phone number for radios with codeplug version
03.xx and above. |
|
|
Support 100
personalities on CM340. |
|
|
Fixed the 12.5 KHz channel frequency issue of CM340/CM360. |
|
|
CPS automatically modifies codeplug mismatched values when reading
archive files of radios with firmware versions R02.00.xx and prior. |
|
R05.00 |
Phase 5 upgrade. |
|
R04.00 |
Support for CM340 and CM360 radios. |
|
|
The channel
position was under 'Conventional Personalities' in the old CPS and is now moved
to the left window under a new item called 'Channel Position'. |
|
R02.05 |
Support for
Designated Power Up Channel. |
|
R02.04 |
Fixed cloning
issues between different codeplug versions. |
|
|
Support for additional
frequency bands for the CM140 and CM160 radios. |
|
R02.01 |
Modified the
transmit power calculation for the CM140 and CM160 radios. |
|
R02.00 |
Support for the
CP140, CP160, CP180, and CM160 radios. |
|
|
Drag and drop support
and cloning support between different codeplug versions. |
|
|
Support for
copying the receive frequency, with an optional user defined offset, to the
transmit frequency. |
|
R01.02 |
Support for new
serial number format from factory. |
|
|
Improved error
handling during radio communication. |
|
R01.01 |
Now supports
synthesizer step sizes of 2.5 kHz. This is necessary to support certain
narrowband (12.5 kHz) frequencies. |
|
|
Now supports per
user settings for the preference settings and the dealer information fields
printed on the customer handout report. |
|
R01.00 |
Support for the
CP040 and CM140 radios. |
|
|
Drag and drop
support between models and products. |
|
|
Support for renaming
personalities, systems, and lists. |
|
|
Support for
multiple selection configuration. For example, create several MDC systems and
select them all in the treeview and set the Primary ID of all the MDC systems
to the same value at once. |
|
Operating
System |
Required
Patches |
|
Microsoft®
Windows® 98 First Edition |
Windows 98 Year
2000 Update |
|
|
Windows 98 Year
2000 Update 2 |
|
|
System Update |
|
Microsoft®
Windows® 98 Second Edition |
|
|
Microsoft®
Windows® Millennium Edition |
|
|
Microsoft®
Windows® NT 4.0 |
SP5 or greater,
excluding SP6 (SP6a is supported). |
|
Microsoft®
Windows® 2000 Professional |
|
|
Microsoft®
Windows® XP Home/Professional Edition |
|
|
Hardware
Recommendations |
|
·
The application takes approximately 16 MB of free disk space on your
PC. However, you may want more space to allow you to save archive files of
your radios. Each archive file varies in size depending on the features of
the radio that are enabled. A good rule of thumb is 75 KB per archive file. |
|
·
For processor speed and RAM, nothing is required beyond the
recommendations given by Microsoft for the release of the operating system
that you are using. |
|
· The
graphical user interface is best displayed using 1024*768 and 65536 color
display or better (use small font). |
|
· A
CD-ROM drive. |
|
· A
serial port or USB to serial port adapter. The BAFO(R) BF-810 USB to serial
port adapter has been tested successfully with the CPS application. |
You need to have Administrator rights on the target PC in order to install the software if you are running Microsoft Windows NT 4.0, Microsoft Windows 2000 Professional, or Microsoft Windows XP Home/Professional Edition.
Proceed as follows
for CD-ROM version:
Proceed as follows
for software package version:
During the upgrade procedure, settings for preferences and dealer information will be reset to their default values. You will need to check these settings after the new version has been installed and make changes as necessary.
To upgrade from a previous version of this software, first remove
the previous version (see instructions in section below) and then install this
version.
This version can open any archive file created with a previous versions.
In addition, it supports all previously released codeplug versions so you will
be able to read, write, and clone older radios as well.
From the Start button on the task bar of your operating system,
select Settings > Control Panel. Select the Add/Remove Programs option
within the control panel. Select the Commercial Series Customer Programming
Software item in the "Currently installed programs" box and click the
remove button.
The following issues are known problems with the R05.02 release of the Motorola Commercial Series CPS.
Microsoft® and Windows® are registered trademarks of Microsoft
Inc.
Motorola® is a registered trademark of Motorola, Inc.
BAFO® is a registered trademark of BAFO Technologies, Inc.
This product includes software developed by the Apache Software Foundation
(http://www.apache.org/).